ASNTPRBS20B_1

2^7-1 / 2^15-1 PRBS Generator w/ Jitter Insertion, Sync Output, & Amplitude Control

Broadband frequency range from 20Mbps – 18Gbps
Minimal insertion jitter
Fast rise and fall times
Two PRBS data outputs, jitter insertion capability, and output amplitude control from 0V to 1V peak to peak
Up to 155ps delay variation on each output
Differential clock output
Show all features
Data Sheet Request Quote
Frequency (min): 20 Mbps
Frequency (max): 18 Gbps
Power: 7200 mW
Package: Board
Price: Request

Product Details

Fig. 1 Functional Block Diagram

The ASNT_PRBS20B_1 is a broadband 27-1 or 215-1 PRBS generator intended for test, prototyping, microwave, and communication applications. The amplitude and phase are adjustable on both differential outputs. There is jitter/phase shift insertion onto either differential output with a bandwidth up to 500 kHz. Output amplitude on both PRBS outputs varies from 0V to 1V single-ended peak to peak. A single-ended clock from 10MHz to 18GHz with an amplitude as low as 100mV peak to peak may be applied to the clock input. A buffered differential clock output is provided. A differential Sync Output divides an input clock from 1 to 256. When using an oscilloscope, the Sync Output triggers the oscilloscope. The system is capable of triggering for an eye diagram for PRBS7/PRBS15 or PRBS7 pattern with divide ratios 127 or 254, and it uses an on-board PRBS reset switch to preset the generator avoiding the all zero state lock-up. An on-board Pattern Select switch selects either PRBS7 or PRBS15.