ASNT8131-KMC

High-Sensitivity Clock Divider-by-2 / by-4

Wide frequency range from DC to 32 GHz
Divided-by-2 and divided-by-4 outputs
50% duty cycle of the divided clock signal
Fully differential CML input interface
Fully differential CML output interface
Single +3.3V or -3.3V power supply
Show all features
Package Footprint Data Sheet Request Quote
Frequency (min): DC
Frequency (max): 32 GHz
Power: 315 mW
Package: 24-pin CQFP
Price: Request

Product Details

asnt8131

Fig.1 Functional Block Diagram

This part is now obsolete, and has been superseded by the following device, which can be viewed here:

ASNT8130-KMC

ASNT8131-KMC is a high-speed, low-power divider by-2 and by-4 with increased sensitivity. The part shown in Fig. 1 accepts a CML input clock signal (cp/cn) with the speed from DC to maximum operational frequency and provides clean 50% duty cycle output signals with divided-by-2 (c2p/c2n) and divided-by-4 (c4p/c4n) frequency. The part’s I/Os support the CML logic interface with on chip 50Ω termination to vcc and may be used differentially, AC/DC coupled, single-ended, or in any combination. The part can operate with either negative supply (vcc = 0.0V =ground and vee = -3.3V), or positive supply (vcc = +3.3V and vee = 0.0V = ground). In case of the positive supply, all I/Os need AC termination when connected to any devices with 50Ω termination to ground. Different PCB layouts will be needed for each different power supply combination.