ASNT6112-KMM

1-to-4 Analog Signal Splitter with Differential Outputs

DC to 25GHz broadband linear signal splitter
One differential CML-type input port and four phase-matched differential CML-type output ports
Differential input linearity range up to 1000mV p-p
Differential gain of approximately -1.5dB
Low jitter and limited temperature variation over industrial temperature range
Single +3.3V or -3.3V power supply
Show all features
Package Footprint Data Sheet Request Quote
Frequency (min): DC
Frequency (max): 25 GHz
Power: 1350 mW
Package: 44-pin CQFP
Price: Request

Product Details

asnt6112-kmm desc

Fig. 1 Functional Block Diagram

The temperature stable ASNT6112-KMM 1-to-4 analog signal splitter is intended for use in high-speed interleaved ADCs or similar systems. The IC shown in Fig. 1 can receive a broad-band analog signal at its differential input dp/dn and effectively distribute it to four separate phase-matched differential outputs q1p/q1n, q2p/q2n, q3p/q3n, q4p/q4n with a nominal gain of 0dB.

The part’s I/O’s support the CML logic interface with on chip 50Ω termination to vcc and may be used differentially, AC/DC coupled, single-ended, or in any combination. In the DC-coupling mode, the input signal’s common mode voltage should comply with the specifications shown in the electrical characteristics section within the part’s datasheet. In the AC-coupling mode, the input termination provides the required common mode voltage automatically. The differential DC signaling mode is recommended for optimal performance. In particular, the specified output common mode voltage level is guaranteed only in case of external single-ended 50Ω DC termination to vcc.