ASNT6194-KHC

1-to-2 Analog Signal Splitter with Differential Outputs

DC to 35GHz broadband linear signal splitter
One differential CML-type input port and two phase-matched differential CML-type output ports
Single endedl input linearity range up to 1.4V p-p
Differential gain of approximately 0dB
Adjustable currents for bandwidth and peaking control
Low jitter and limited temperature variation over industrial temperature range
Show all features
Package Footprint Data Sheet Request Quote
Frequency (min): DC
Frequency (max): 35 GHz
Power: 760 mW
Package: 24-pin CQFN
Price: Request

Product Details

Fig. 1 Functional Block Diagram

The temperature stable ASNT6194-KHC 1-to-2 analog signal splitter is intended for use in high-speed interleaved ADCs or similar systems. The IC  can receive a broad-band analog signal at its differential input dp/dn and effectively distribute it to two separate phase matched differential outputs q1p/q1n, q2p/q2n with a nominal gain of 0dB. Two low-speed analog current controls Ief1c and Ief3c are available for bandwidth and peaking adjustments.

The part’s I/O’s support the CML logic interface with on chip 50Ohm termination to vcc and may be used differentially, AC/DC coupled, single-ended, or in any combination (also see POWER SUPPLY CONFIGURATION). In the DC-coupling mode, the input signal’s common mode voltage should comply with the specifications shown in ELECTRICAL CHARACTERISTICS. In the AC-coupling mode, the input termination provides the required common mode voltage automatically. Optimal performance is achieved with differential DC signaling mode.